Floor Cleaning is one of the most important aspects of any cleaning programme and an essential element of any property, also depending on what kind of surface you have in your house; it will require different specialist equipment and techniques. Some general tips for keeping floors clean are to employ a proper selection of mats at doorways, often an entrance area with easy to clean floors (for example Floor cleaning machines) and a dedicated area to store shoes. Just some of these simple techniques can make a dramatic impact on the cleanliness of a house that doesn't have these ideas properly implemented.

Carpet Cleaning & Care

It is always a good idea to regularly vacuum the surface of carpets, this helps remove dirt that can cause permanent damage to fibres and also try to deal with spillages as soon as you can, the longer a spillage stays on a surface the more damage it can do. Often people look to get carpets or rugs cleaned professionally but there are various ways in which carpets can be cleaned to a very high standard without hiring professionals. Always use recommended or qualified products that are specified for use on the surface that you want to clean and so it is a bad idea to use generic cleaning products such as soap or dish washing liquids, these will often damage the surface far more then they clean it (for example the colour will bleed). It is a good idea before any new cleaning is done to a carpet to test the quality of the finish in inconspicuous areas, but always make sure you use a quality carpet Floor cleaning machine

When it comes to specific floor types, each different surface requires different cleaning techniques and products, some of these include,

Marble Floors

Marble and limestone flooring is surprisingly delicate to clean, these surfaces are very tough and will last for a very long time but in order to keep the best possible surface there are some techniques that can be employed to ensure its lasting quality. Due to the nature of the surface it is a bad idea to use strong acids or alkalis that are often used to attack dirt as this often damages the quality of the surface. It is also a good idea to not scrub the surface of marble or limestone floors, especially with coarser cleaning equipment such as scouring pads, this also includes buffing or scrubbing machines as these can leave visible marks on the surface which can only be removed with polishing. Marble surfaces will clean efficiently with dilute detergent solutions and should be well rinsed after washing and left to dry, often surfaces such as marble are polished professionally but can be polished with a dry cloth.

Wood Floors

Often wooden floors are polished so this has to be taken into account when cleaning; it isn't a good idea to use detergents, bleach, vinegar and ammonia. It is always a good idea to purchase wax based detergents to maintain wax flooring, and use a damp cloth to remove scuff marks, which should be removed quite easily with a bit of water and some scrubbing. You should always remember that the majority of normal detergents remove wax from flooring, always be careful when cleaning waxed floors as water can make them very difficult to stand on. After wooden floors have been cleaned it is a good idea to fully buff the finished floor, and it always a good idea to regularly re-wax wooden flooring to ensure that it keeps the quality of shine that it had to start with.

Laminate Flooring

Often a good idea for houses that want a low maintenance solution, it is often considered as an alternative to genuine wood or stone surfaces. Often have a greater adaptability then genuine surfaces such as wood and stone, for example they react far better to water so can be used in kitchens and bathrooms. The first cleaning required on laminate flooring is the simple sweeping and vacuuming of the entire area, always clean the flooring with solutions specified by the manufacturers and use a simple flat mop and use smaller quantities of cleaning solutions then perhaps you would use on normal carpets. It is a good idea to never polish or wax ; these will damage the current finishes and make the flooring appear patchy, and also never clean with abrasive cleaning products such as scouring pads or steel wool.

Concrete Flooring

Often cleaned using mild cleaner or dish soap, never using ammonia or vinegar, concrete floors are often quite easy to maintain and obviously have a high resistance to stains and ware. Always make sure to remove any remaining soap residue with warm water after the area has been cleaned and always wring the mop thoroughly during cleaning, too much cleaning solution or water may degrade the finish and generally only small amounts of water are needed to clean concrete.